Advertisement
Quick Links
Advertisement
Related Manuals for Kogan KAWWASHT85A
Summary of Contents for Kogan KAWWASHT85A
- Page 1 8.5KG TOP LOAD WASHING MACHINE KAWWASHT85A & KAWWASHT85B...
- Page 2 Safety & warnings Overview Installation Operation Cleaning & care Specifications Troubleshooting Notes...
-
Page 3: Safety And Warnings
• Do not overload the wall outlet. Overloading can result in fire or electric shock. • If the power cord is damaged, contact Kogan.com for support. • Never use this washing machine with a power adaptor or an extension cord. - Page 4 Installation • Install the washing machine on a flat surface to avoid overturning during use. If the machine must be placed on carpet, make sure any ventilation openings in the base are not obstructed. • Install the washing machine so that there is a distance of at least 200mm between the appliance enclosure and any external heat sources, such as appliances containing heating elements.
- Page 5 • This appliance should only be serviced by an authorised service centre and only genuine spare parts should be used. Contact help.kogan.com for support. Warnings • Do not let children climb into the washing machine or peer into the rotating spin barrel.
- Page 6 OVERVIEW Front Rear Accessories Description Description Wash/spin tub Control panel Water supply hose connections Housing Drain pump filter Detergent box Drain hose connection Lint filter Adjustable leg (1) Accessories Description No Description Hot water supply hose Cold water supply hose Drain hose with elbow...
-
Page 7: Installation
• Unwind the power cord to its full length and inspect it for damage. Do not use the appliance if the appliance or its cord has been damaged or is not working properly. In case of damage, contact Kogan.com support for advice on examination, repair or return of the damaged product. - Page 8 Base of the washer Lock nut Tighten Loosen Down Adjustable leg Connecting the water inlet hoses Install the water inlet hoses to your hot and cold-water taps, as described below. • Check and ensure that the sealing washers are firmly in place. •...
- Page 9 • Tighten the nut by turning it clockwise while holding the hose. (To detach the water supply hose, turn the nut anticlockwise after turning the tap off.) Water inlet valve • Turn on the taps and check for leaks. Tighten the coupling nuts firmly if there is any leakage.
- Page 10 Installing the drain hose • The drain hose and drain pump filter are located at the rear of the machine. • Pinching the two bands of the clamp on the drain hose, connect it to the drain hose connection at the back of the washer. •...
- Page 11 CAUTION: • While the washer is in use, ensure the height of the drain hose is at least 70cm, otherwise the washer will not work properly or the water may flow out while washing. Ensure the drain hose is not higher than 1m above ground, otherwise the washer will not drain water well.
-
Page 12: Operation
OPERATION Control Panel Display: 1. The display shows the currently selected option. For example: Status Display Result During washing, it shows the time Remaining time is 20 minutes remaining When setting soak and wash processes, this indicator shows the Washing time is 10 minutes time you set When setting the pre-set timer, it shows when the washing will be... - Page 13 2. Power ON/OFF button • Press this button to switch the power on, press it again to switch it off. • To change the program, press this button once and then once more. • Power will be switched off automatically: •...
- Page 14 Before you start washing • Ensure the washer is stable and level. If necessary, adjust the adjustable leg (front right) to stabilise the washer. For more information, refer to the “Levelling the Washer” steps in the Installation section of this user guide. •...
- Page 15 Default settings for wash processes Program Suitable items Wash Spin time time* Rinse type (minutes) (minutes) Normally soiled cotton Normal clothing/items; for energy 3x Shower rinse efficiency test Normally soiled cotton 2x Water saver rinse Custom clothing/items (0-20) (0-4***) (0-9) Heavily soiled cotton 2x Water saver rinse Heavy Duty...
- Page 16 Water level indicator Water volume (approx.) Detergent indicator Amount of powder 10-25g 26-35g 36-50g 51-70g detergent Another When using a liquid or concentrated detergent, follow the detergent recommendations on the detergent packaging for a top load washing amount machine. Customising a program This washing machine is equipped with a fuzzy logic function that automatically chooses certain wash cycle processes for the Custom, Heavy Duty and Quick programs.
- Page 17 Minutes (Soak time can be adjusted for the Custom, Heavy Duty and Blanket Programs) Minutes (The numbers represent the number of rinses) Minutes (Except Delicate program, see below) Minutes for Delicate program Press the Water Level button and choose an appropriate water level. Close the lid and press the Start/Pause button for the washing program to start.
- Page 18 Fold up the blanket and put it into the washing tub, as illustrated below. Fold in 2 by Fold 4 times in the Roll up the Put into the wash the long side same direction blanket tub with the edge Close the washer lid.
- Page 19 Preset timer (delayed washing) This washing machine has a 0-24 hour preset function, which you can set to determine the time when the washing program will finish. (It is, in effect, like a 'delayed start' function, but you set the time period after which you want the wash to finish rather than to start.) Note: This function is not available for the Normal, Delicate and Quick programs.
- Page 20 Load sensor (fuzzy control) For the Custom and Heavy Duty programs, the machine automatically detects the weight of your wash load and selects the appropriate water level, wash and spin time and rinse type. For the Quick program, the machine will automatically choose the water level. You do not have to set these values;...
- Page 21 To set different water levels: • Press the Process button until the Wash light flashes; press the Water Level button to choose the appropriate water level (it will be shown on the display screen); press the Set button to set the wash time. •...
- Page 22 Child lock With the child lock activated, the machine will stop working automatically and sound an alarm if the washer lid is opened for 4 seconds. To set the child lock: • Press the Power button to switch on the power, then press and hold the Program button for 4 seconds until a buzzer sound.
-
Page 23: Cleaning And Care
CLEANING & CARE To prolong the service life of the washing machine, keep it in good condition and perform regular maintenance. For any type of cleaning and maintenance, ensure the washing machine is disconnected from the mains power supply. Cleaning the washing machine (when required): •... - Page 24 Cleaning the water inlet valve (suggested interval: every 6 months) To avoid blockage of the mesh filter at the water inlet after long time use, detach the water inlet hose, making sure you have turned off the water supply at the taps beforehand. Take the mesh filter out of the water inlet valve and clean the filter with a soft brush.
- Page 25 • To remove any objects from the filter, wash it thoroughly in a basin or under running water (below, left). • Put the cap back and place the filter back in its seat (below, right). Filter...
-
Page 26: Specifications
SPECIFICATIONS Dimensions 570 x 592 x 965mm Capacity (max. weight of dry wash load) 8.5kg Weight 38kg Water quantity (High) 75 Litres Power source 230-240V~ 50Hz Power consumption 400W Required water pressure 0.03MPa - 0.8Mpa Liquid ingress protection IPX4 Required tap size 20mm... -
Page 27: Troubleshooting
Why is the control panel still warm after the This is caused by the memory circuitry still working. power is switched off? If none of the solutions offered above and on the following page help you solve the problem, contact help.Kogan.com support for advice. - Page 28 Press the Power ON/OFF button to turn off the power, then Other problems. contact Kogan.com for support. Note: Press the Start/Pause button once to release the emergency stop and cancel the error message; press it again to restart the operation.
- Page 29 NOTES...
- Page 31 NOTES...
- Page 32 Need more information? We hope that this user guide has given you the assistance needed for a simple set-up. For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.com...