Level adjustment
The machine must stand perfectly level on all four feet to ensure safe and proper operation.
Incorrect installation may increase electricity and water consumption and may cause the
machine to move during usage.
The level can be adjusted using the Adjustment feet on the bottom of the machine
Loose
Raise
Using the spanner rotate the locknut in a clockwise direction. Then rotate the
•
locknuts together with adjustable feet to raise or lower.
Use a spirit level to check the machine is level.
•
Hold adjustable feet securely with a pipe wrench. Turn locknut again using the
•
spanner until it sits firmly up against the housing.
Note:
Vibration and noise may occur if the locknuts do not sit firmly up against the houses.
Locknuts
Locked
Lower
Adjustable Feet