Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Kogan KAWFLWASM9B
Summary of Contents for Kogan KAWFLWASM9B
- Page 1 9KG FRONT LOAD INVERTER WASHING MACHINE SERIES 9 KAWFLWASM9A, KAWFLWASM9B...
-
Page 3: Safety And Warnings
Damaged or loosened cables or plugs should not be used to avoid the risk of electric shock, short circuit, or fire. • If the supply cord is damaged, it must be replaced by Kogan.com or its service agent to avoid a hazard. •... - Page 4 • Keep all packing materials (plastic bags, foam etc) away from children. • Do not pull the cable from the socket when unplugging the unit. Always grasp the plug firmly to remove the cable from the power socket. • Do not wash, rinse, or spin waterproof fabrics or cloth, sleeping bags, raincoats, or skiing clothes.
- Page 5 COMPONENTS Washing Machine (x1) Water Inlet Hose (x1) Transit Bolt Caps (x4) Spanner (x1) User Guide (x1)
- Page 6 OVERVIEW Note: It is recommended to run the drum clean program before washing clothes in the machine for the first time. Control Panel Water Inlet Valve Power Cord Detergent Drawer Body Washer Door Wash/Spin Drum Adjustable Feet...
- Page 7 Power Cord Cold Water Inlet Valve Transit Bolts Rear Cover Note: The artwork in this user guide is intended for reference only and may differ from the actual product.
-
Page 8: Installation
INSTALLATION Packaging • Remove all the packaging (Including the foam base). • Properly dispose of all the packaging and keep them out of the reach of children. • Some condensation may appear on the packaging plastic bag and the door glass. Transportation Two people are required to carry the machine. - Page 9 Removing the Transit Bolts To protect the machine in transportation, there are 4 bolts inserted into the inner part of the machine to keep the drum in place. These bolts must be removed before use, or damage to the internal components of the machine or surrounding environment may occur. Unscrew each of the four bolts with a spanner.
- Page 10 Level Adjustment Adjust the machine horizontally There may be strong vibrations, noise and disfunction if the washing machine is not steadily installed before operation. To ensure the appliance is correctly levelled: Check whether the washer is on a level surface using a plumb line as shown in the image below.
- Page 11 Place both hands on top of the washer diagonally, then press down and shake the washer slightly to make sure that the washer is steady. Connecting the water inlet hose to the tap Check that the sealing washer is firmly seated. Attach the curved end of the hose to the inlet valve of the washing machine.
- Page 12 Connecting the water supply hose to the washer Turn the nut clockwise while holding the hose until the nut is tight. When the hose requires detaching, turn the nut counter-clockwise after turning the tap off. Hose Connecting the drain hose Drain hose Drain hose...
-
Page 13: Operation
OPERATION Detergent drawer Powder synthetic detergents For undissolved detergents, e.g. powder state soap, dissolve in water in advance before pouring into the drawer. Liquid detergent and bleach Use low bubble liquid synthetic detergents. Dilute concentrated liquid detergents twice with water before pouring into the drawer. - Page 14 Control Panel Knob Display Button Start/Pause button: • Press the button to start a program and press again to pause. Program Select knob: • Select the desired program to power on. • Turn to On/Off position to end a wash cycle early and power off. •...
- Page 15 Speed button: • Set the spin speed according to the user’s requirement. • The speed setting range is different between programs, and some will have a temperature range limitation. Delay button: • Allows the user to set the finishing time of the set program. Oxygen Fresh button: •...
- Page 16 Wash programs Cotton Eco Recommended for a normally soiled cotton load at rated capacity Cotton Wash cotton clothes only Mix Wash Mixed wash of cotton and synthetics clothes Jeans Wash jeans and heavy denim clothing Wool Wash wool clothes that are machine washable Synthetic Wash clothing with synthetic fibres Winter clothes...
- Page 17 Wool • Always check any care instructions that may be on the clothes before washing. • When the wash is completed, remove the clothes for airing immediately to avoid deformation. • The temperature cannot be set higher than 40 degrees to avoid damage to clothing.
- Page 18 Mute buzzer Enabling this function will mute the buzzer that sounds when a program has finished. After powering on the machine, press and hold the “Start/Pause” button until the buzzer is heard to mute the buzzer. Repeat this process to disable the mute function. Child Protection •...
- Page 19 DOOR LOCK Unlocking the Automatic Door Lock When the machine is operating, the door locks automatically. This is to prevent scalding from touching hot water before it has a chance to cool down. In normal usage, the door will not be unlocked until either the cycle is stopped, or the emergency pull-rope is activated. When the machine is working, press the "start/stop"...
-
Page 20: Cleaning And Care
CLEANING & CARE Ensure to maintain the machine after long term use to maximise the lifetime of the product. Always disconnect the power before cleaning or maintaining the appliance. Machine body • Use a soft cloth to clean the body after each wash. If it is heavily soiled, put some mild detergent or soapy water on the cloth to clean the body. - Page 21 Water inlet valve (recommended to be performed twice yearly) Take out the inlet pipe. Take out the filter screen. Use a toothbrush to clean the filter screen and then assemble it again. Reconnect the inlet pipe after cleaning. Valve Machine frozen Wrap a hot towel around the water tap and connector Water tap Connect side...
- Page 22 Put 2-3 litres of hot (50˚ C ) water into the machine. 50˚ C Assemble the inlet pipe again, open the water tap and start the machine. Once this has been done, examine the inlet pipe and drain pipe to ensure they can operate normally.
-
Page 23: Specifications
SPECIFICATIONS Rated wash capacity 9.0kg Rated spin capacity 9.0kg Rated dry capacity Rated dry power Max current Rated voltage 230-240V-50Hz Rated power 2000W Energy efficiency 4 Stars Water efficiency 4 Stars Water consumption per wash Annual energy consumption 316kWh Washing performance Water pressure 0.03-1.0MPa Product dimension... -
Page 24: Troubleshooting
TROUBLESHOOTING Issue Probable Cause • Water temperature/water level is too high, or power has been cut. Door cannot be opened • Child lock function has been enabled • Clothes are jammed between door and gasket. • The rubber components of the machine may emit an Peculiar smell odour for the first few washes. - Page 25 • Load fewer towels into the wash. • Avoid placing rolled up blankets into the machine. Close the door properly and then Door not closed press Start/ Pause to restart. Press the Start/Pause button Other code Alarm to restart. Contact Kogan.com if issues persist.
- Page 26 NOTES...
- Page 27 NOTES...
- Page 28 Need more information? We hope that this user guide has given you the assistance needed for a simple set-up. For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.com...