Using The Output Power Selection Switch - Bosch INTEGRUS Installation And Operating Manual

INTEGRUS | Installation and Operating Manual | Infra-Red Radiators
Figure 3.10 Loop-through connection of LBB 4511 and/or
LBB 4512 IR Radiators
3.5 Using the output power
selection switch
The radiators can be switched to half power. This can
be used when full power is not required, e.g. when a
mobile system is used in a small conference venue.
Also switch a radiator to half power when an adequate
air flow can not be guaranteed, e.g. when the radiator
is mounted on top of an interpreters booth. Reducing
the power when possible saves energy and increases
the lifetime.
Bosch Security Systems | 2003-02 | 3122 475 22011en
en | 39