Configure Auxiliary Inputs - Bosch INTEGRUS Installation And Operating Manual

INTEGRUS | Installation and Operating Manual | Infra-Red Transmitters
Menu Item
4G C.Overview ...
4G Carrier n

2.5.13 Configure auxiliary inputs

The way the signals on the auxiliary inputs (Aux-.L
and Aux.-R) are handled can be set in the Aux. Input
Mode menu (4H).
When the option 'Stereo' is chosen, the signals on both
Aux. inputs are distributed as a stereo signal to all
channels. This setting can for instance be used to trans-
mit a music signal during breaks in a conference. Note
that the Transmission mode must be set to 'Aux to All'
(menu item 4A) to actually transmit this stereo signal.
The 'Stereo to Mono' and 'Mono+ Emergency' options
can be selected when the transmitter is used in combi-
nation with an interpretation system. The Aux. input(s)
will be distributed to the Symmetrical Audio Input and
Interpreters Module. In this configuration the 'floor'
signal should be connected to the Aux. inputs.
Menu Items
4H Aux. Input
Bosch Security Systems | 2003-02 | 3122 475 22011en
Options
Carrier nr.:
0 ... 7
Channel numbers:
-00 ... 31 or --
Option
Type:
* - Stereo
- Stereo to Mono
- Mono + Emergency
Description
Push the button to go to the sub-menu.
Select which carrier to view.
Shows the channel numbers that are assigned to the selected
carrier. The symbol '—' is used when less than 4 channels are
assigned.
Description
The Aux. inputs will be distributed in stereo to all channels when
the transmission mode (menu item 1) is set to 'Aux to All'.
The Aux-L and Aux-R inputs are combined into a mono signal and
distributed to the Symmetrical Audio Input and Interpreters
Module (when present).
The Aux-L input is distributed to the Symmetrical Audio Input and
Interpreters Module (when present). The Aux-R input is distributed
as emergency signal to all channels when the emergency switch
is closed.
en | 32