Bosch INTEGRUS Installation And Operating Manual page 28

INTEGRUS | Installation and Operating Manual | Infra-Red Transmitters
Example 2: Assign a new user defined name to
channel 12. (See also section 2.5.10.)
Transmitter
32 Channels
4 Setup ...
4A Transmission
On
4E Ch.Names ...
Floor
4E Channel 00
Spanish
4E Channel 12
Spanish
4E Channel 12
Spanish
4F Carrier 12
Spanisch
4E Channel 12
Spanish
4E Channel 12
• - - -
Bosch Security Systems | 2003-02 | 3122 475 22011en
1. Turn the button to select
the 'Setup' item (4) in
the Main menu.
2. Push and hold the but-
ton for 3 seconds to go
to the 'Setup' sub-menu.
3. Turn to select the 'Ch.
Names' sub-menu item
(4E).
4. Push to go to the 'Ch.
Names' sub-menu.
5. Turn to select the
required channel num-
ber (12).
6. Push to confirm.
7. Turn to move the cursor
to the start of the second
line.
8. Push to confirm.
9. Turn clockwise until the
channel name changes
to: • - - -
10. Push to confirm.
4E Channel 12
• - - -
4E Channel 12
• - - -
4E Channel 12
• - - -
4E Channel 12
• C--
4E Channel 12
• C--
4E Channel 12
• CD Music
4E Channel 12
• CD Music
4 Setup ...
Transmitter
32 Channels
en | 22
11. Turn to move the cursor
to the first dash.
12. Push to confirm.
13. Turn to select the first
character (C).
14. Push to confirm this
character.
15. Repeat steps 11 to 14 for
the other characters.
16. Turn to move the cursor
to the Main menu item
number (4).
17. Push to confirm.
18. Turn to select the Trans-
mitter Status screen.
19 Ready.