Disable Or Enable Carriers; View Carrier Assignments - Bosch INTEGRUS Installation And Operating Manual

INTEGRUS | Installation and Operating Manual | Infra-Red Transmitters
Menu Items
4D Language List

2.5.11 Disable or enable carriers

Normally the channels are automatically assigned to
the available carriers. However, when the reception
quality of a specific carrier is not good, that carrier can
be disabled manually. The channels are then automati-
cally re-assigned to the next available carriers.
Each of the 8 carriers (0 to 7) can be disabled or
enabled in the Carrier Settings menu (4C).
Menu Items
4F C.Settings ...
4F Carrier n

2.5.12 View carrier assignments

With menu option 4G the carrier assignment can be
seen, i.e. which channels are transmitted on each carri-
er. Note that the number of channels that can be dis-
tributed on one carrier depends on the chosen quality
mode. See examples below.
4G Carrier 1
Ch. 04 05 06 07
Channels 4, 5, 6, and 7 (all Mono
MQ) are assigned to carrier 1.
Bosch Security Systems | 2003-02 | 3122 475 22011en
Option
Language:
* English
French
Original
Options
Carrier nr.:
0 ... 7
Status:
- Disabled
- Enabled
4G Carrier 4
Ch. 16 17 -- --
Channels 16 and 17 (both Mono MQ)
are assigned to carrier 4. Room for
more channels on same carrier.
Description
Present language list in English.
Present language list in French.
Present each language name in it's original language
(e.g. English, Français, Deutsch, etc.)
Description
Push the button to go to the sub-menu.
Select which carrier to configure.
The selected carrier is disabled (off).
The selected carrier is enabled (on).
4G Carrier 5
Ch. 18 18 19 19
Channels 18 and 19 (both Mono
PQ) are assigned to carrier 5.
en | 31