Bosch INTEGRUS Installation And Operating Manual page 29

INTEGRUS | Installation and Operating Manual | Infra-Red Transmitters
Example 3: Set channel 11 to transmit a Stereo signal
in Premium Quality, using audio inputs
14 (L) and 15 (R) as source.
(See also section 2.5.9.)
Transmitter
32 Channels
4 Setup ...
4A Transmission
On
4C Ch. Quality
All Mono SQ
4C Ch. Quality
All Mono SQ
4C Ch. Quality
All Mono SQ
4C Ch. Quality
All Mono SQ
4C Ch. Quality
Per Channel ...
* Note that after selecting 'Stereo' as input mode
(step 14) the input number changes automatically
to the next even number (12), which is the input
number of the left signal.
Bosch Security Systems | 2003-02 | 3122 475 22011en
1. Turn the button to select
the 'Setup' item (4) in
the Main menu.
2. Push and hold the but-
ton for 3 seconds to go
to the 'Setup' sub-menu.
3. Turn to select the 'Chan-
nel Quality' sub-menu
item (4C).
4. Push to confirm.
5. Turn to move the cursor
to the option on the sec-
ond line.
6. Push to confirm.
7. Turn to select the option
value 'Per Channel ...'.
8. Push to go to the 'Chan-
nel' sub-menu (4C).
4C Channel 00
Mono SQ In 00
4C Channel 11
Mono SQ In 00
4C Channel 11
Mono SQ In 11
4C Channel 11
Mono SQ In 11
4C Channel 11
Mono SQ In 11
4C Channel 11
Stereo PQ In 11
4C Channel 11
Stereo PQ In 12
4C Channel 11
Stereo PQ In 12
en | 23
9. Turn to select the
required channel num-
ber (11).
10. Push to confirm.
11. Turn to move the cursor
to the quality option.
12. Push to confirm.
13. Turn to select the
required quality value
(Stereo PQ).
14. Push to confirm. *
15. Turn to move the cursor
to the input number.
16. Push to confirm.