Navigate Through The Menu - Bosch INTEGRUS Installation And Operating Manual

INTEGRUS | Installation and Operating Manual | Infra-Red Transmitters

2.4.2 Navigate through the menu

Operating the menu is always a sequence of alternating
turns and pushes:
Turn the button to:
• Cycle through the menu items within a menu (the
menu item number and title on the first line is
blinking).
• Go to a settable option within a menu item (a
blinking cursor moves through the menu screen).
• Cycle through the available values for a settable
option (the value is blinking).
Push the button to:
• Confirm a chosen menu item (the menu item num-
ber and title stops blinking, a blinking cursor
appears).
• Go to a sub-menu (the sub-menu item character
starts blinking).
• Confirm the selection of a settable option (the cur-
sor disappears, the option value starts blinking).
• Confirm a selected value for a settable option (the
value stops blinking, the cursor appears again).
After 5 minutes of inactivity, the display automatically
switches back to the first item of the Main menu
(Transmitter Status).
Each menu item is identified by a number (for the
Main menu) or by a number plus a character (for the
sub-menus). The item identification can be found at
the start of the first line and is used to navigate to and
from sub-menus.
Most menu items have one or more settable configura-
tion options. The value of an option can be changed
by selecting a value from a list of available values.
main menu
item number
Figure 2.13 Menu item screen elements
Bosch Security Systems | 2003-02 | 3122 475 22011en
sub-menu
item character
4C Ch. Quality
Per Channel ...
To navigate through the Main menu:
1. Turn the button to move through the Main menu
items. The item number and title starts blinking.
(The first item, Transmitter Status, doesn't blink.)
To jump to a sub-menu:
1. Navigate in the Main menu to an item with three
dots (e.g. 'Setup ...').
2. Push the button to go to the sub menu. The sub-
menu item character and title starts blinking.
Note: To enter the Setup sub-menu,
push and hold the button for at least
3 seconds.
To navigate through a sub-menu:
1. Turn the button to move the cursor to the sub-
menu item character.
2. Push the button. The item character and title starts
blinking.
3. Turn to select another sub-menu item character.
4. Push to confirm the selection.
To change option values
1. Navigate to the applicable menu item.
2. Turn the button to move the cursor to the option
value you want to change.
3. Push the button to activate the option. The option
value starts to blink.
4. Turn the button to select a new option value.
5. Push the button to confirm the new value.
The option value stops blinking.
6. Turn the button to move the cursor to another
settable option (when available) and repeat steps
3 to 5.
menu item title
three dots indicate
that the item has a
sub-menu
en | 20
4C Channel 12
Stereo PQ In 03
option values