Examples - Bosch INTEGRUS Installation And Operating Manual

INTEGRUS | Installation and Operating Manual | Infra-Red Transmitters
To jump back from a sub-menu to an item of the
Main menu:
1. Turn the button to move the cursor to the Main
menu item number.
2. Push the button. The item number and title starts
blinking.
3. Turn to select another item number.
4. Push to confirm the selection.
When you are turning counter-clockwise through sub-
menu items, the display jumps automatically to the
Main menu after you have reached the first item (A) of
the sub-menu. Example:
4B Nr. of Ch.
32 Channels
Example 1: Disable carrier 2. (See also section 2.5.10).
Transmitter
32 Channels
4 Setup
4A Transmission
On
4F C.Settings...
4F Carrier 0
Enabled
4F Carrier 2
Enabled
4F Carrier 2
Enabled
Bosch Security Systems | 2003-02 | 3122 475 22011en
4A Transmission
On
1. Turn the button to select
the 'Setup' item (4) in
the Main menu.
2. Push and hold the
button for 3 seconds to
go to the 'Setup' sub-
menu.
3. Turn to select the
'C.Settings' sub-menu
item (4F).
4. Push to go to the
'C.Settings' sub-menu.
5. Turn to select carrier 2.
6. Push to confirm.
7. Turn to move the cursor
to the second line.

2.4.3 Examples

Each step in the examples below shows the text on the
display and the action to go to the next step. Bold text
in italics (text) indicates that the text is blinking. An
underscore ( _ ) indicates the position of the cursor.
Each example starts at the Transmitter Status screen.
4 Setup ...
4F Carrier 2
Enabled
4F Carrier 2
Enabled
4F Carrier 2
Disabled
4F Carrier 2
Disabled
4F Carrier 2
Disabled
4 Setup ...
Transmitter
32 Channels
en | 21
3 Enquiry ...
8. Push to confirm.
9. Turn to select 'Disabled'.
10. Push to confirm.
11. Turn to move the cursor
to the Main menu item
number (4).
12. Push to confirm.
13. Turn to select the
Transmitter Status
screen.
14. Ready.