Set Channel Quality And Assign Inputs To Channels - Bosch INTEGRUS Installation And Operating Manual

INTEGRUS | Installation and Operating Manual | Infra-Red Transmitters
2.5.9 Set channel quality and assign inputs
to channels
The audio quality of the channels (mono/stereo, stan-
dard/premium) can be set in sub-menu 4C. The quali-
ty can be set the same for all channels or for each
channel separately. Note that choosing stereo and/or
premium quality uses more bandwidth and decreases
the number of available channels (see section 1.2.4).
In stereo mode, the left signal is always an even num-
bered input. The next higher input number is used for
the right signal.
When the quality is set the same for all channels with
the 'All Mono' or 'All Stereo' options, the inputs are
assigned automatically to the channels as indicated in
the table below:
All Mono
Channel Input
00 00
01 01
... ...
31 31
With menu option 4C (Per Channel Settings), the
assignment can also be done for each channel
separately.
Menu Items
4C Ch. Quality
Bosch Security Systems | 2003-02 | 3122 475 22011en
All Stereo
Channel Input L Input R
00 00 01
01 02 03
... ...
15 30 31
Option
Quality:
* All Mono SQ
All Mono PQ
All Stereo SQ
All Stereo PQ
Per Channel . . .
...
Description
Set all channels to mono, standard quality.
Set all channels to mono, premium quality.
Set all channels to stereo, standard quality.
Set all channels to stereo, premium quality.
Select this option to go to the 'Per Channel Settings' menu.
en | 29