Set Channel Names - Bosch INTEGRUS Installation And Operating Manual

INTEGRUS | Installation and Operating Manual | Infra-Red Transmitters
Per Channel Settings:
Menu Item
4C Channel nn

2.5.10 Set channel names

Each channel can be assigned a name via the Channel
Names menu (4E). This can be 'Floor' or one of 30
pre-defined ISO language names. Also up to 32
userdefined names can be added.
See also example 2 in section 0. The language in
which the pre-defined names are presented can be
chosen via the Language List menu option (4D).
Menu Item
4E Ch. Names ...
4E Channel nn
Bosch Security Systems | 2003-02 | 3122 475 22011en
Options
Channel nr.:
00 ... 31
Quality:
- Disabled
* - Mono SQ
- Mono PQ
- Stereo SQ
- Stereo PQ
Input:
00 ... 27
Options
Channel nr.:
00 ... 31
Language name:
* - 'Floor'
- ISO language names
- User defined names
Description
Select which channel to configure.
Disable selected channel.
Set selected channel to mono, standard quality.
Set selected channel to mono, premium quality.
Set selected channel to stereo, standard quality.
Set selected channel to stereo, premium quality.
An asterix (*) is shown when the selected quality mode is not
possible, because the total bandwidth of the carrier will be
surpassed (see section 1.2.4).
Select the audio input that should be distributed on the selected
channel. For stereo signals the input number of the left signal
(even number) should be selected. (Not more than 28 inputs
can be rerouted.)
Description
Push the button to go to the sub-menu.
Select which channel to name.
Set the name for the selected channel.
Use this name for the channel that carries the 'Floor' language.
Choose from pre-programmed ISO language names.
Up to 32 user defined names (max. 12 characters) can be
added and chosen.
en | 30