Configuration Of The Load Controller - Siemens LMV51 Series Basic Documentation

Selection of operating
mode
Menu level 1 Menu level 2
Params & Display
SystemConfig
Menu level 1 Menu level 2
Params & Display
LoadController
Menu level 1 Menu level 2
Params & Display
LoadController
Menu level 1 Menu level 2
Params & Display
LoadController
Siemens Building Technologies
HVAC Products

7.1.5 Configuration of the load controller

® «Operating modes with the load controller»
Example: Internal load controller with Pt1000 sensor.
Menu level 3
LC_OptgMode
Or, alternatively:
Menu level 3
Configuration
After the internal load controller has been activated, the sensor input must be selected
and configured.
Menu level 3
Configuration
Then, the temperature measuring range must be defined.
Menu level 3
Configuration
Basic Documentation LMV51...
7 Commissioning instructions for the LMV51... system
Menu level 4 Menu level 5
ExtLC
IntLR
IntLC o.DDC
IntLC DDCan
ExtLCanalg
ExtLC o.DDC
Menu level 4 Menu level 5
LC_OptgMode
ExtLC
IntLR
IntLC o.DDC
IntLC DDCan
ExtLCanalg
ExtLC o.DDC
Menu level 4 Menu level 5
Inp1/2/4Sel
Pt100
Pt1000
Ni1000
TempSens.
PressSensor
Pt100Pt1000
Pt100Ni1000
NoSensor
Menu level 4 Menu level 5
Inp1/4/MaxValue
150°C/302°F
400°C/752°F
Menu level 6
Menu level 6
Menu level 6
Menu level 6
129/157
CC1P7550en
29.05.2002