Siemens LMV51 Series Basic Documentation page 4

· A password is required to protect the parameter setting level against unauthorized access.
The OEM assigns individual passwords to the parameter setting levels he can access.
The default passwords used by Siemens must be changed by the OEM.
These passwords are confidential and may only be given to persons authorized to access such
parameter setting levels!
· The responsibility for setting the parameters is with the person who - in accordance with his access
rights - has made changes to the respective setting level.
In particular, the OEM assumes responsibility for the correct parameterization in compliance with the
norms and standards covering the specific application (e.g. EN 676, EN 267, EN 1643, TRD 411, TRD
412, etc.).
1)
OEM = burner or boiler manufacturer
4/157
Siemens Building Technologies
HVAC Products
Basic Documentation LMV51...
Stützpunktnummern (SP)
Stützpunktdaten
Stützpunktdaten
CC1P7550en
29.05.2002