Table of Contents
Advertisement
9/ INFORMATION BUTTON
From the Shutdown, Auto, Comfort, Economy and Frost protection
modes, the Information button (i) is active and is used to display
the following information:
Current temperature setting, or measured temperature if the
❶
previous screen displayed the temperature setting.
Outdoor temperature, if an outdoor sensor is connected to
❷
the boiler),
Required boiler temperature (water flow).
❸
Real boiler temperature (water flow).
❸
DHW temperature, if the DHW is controlled by the thermostat,
❺
see PI 05.
Boiler maintenance counter. To initialise the counter:
❻
Press C for 5 seconds. The initialisation screen with the
-
flashing default value is displayed (CF08 in days).
Confirm the initialisation of the counter with OK, or exit
-
by using the selector knob.
Faults:
❼
: Maintenance required
: Remote reset authorised
: Low water pressure
: Burner fault
Press the i button to move from one information item to another. The
selector knob is used to exit the information screen. For temperatures,
'--.-°C' is displayed if there is no information.
16
: Air pressure fault
: High water temperature
: Refer to the boiler user guide
to determine the meaning of
the fault.
Ou
1
3
2
6
5
❻ To initialise
the boiler
maintenance
counter
4
7
>5s
17
EN
Advertisement
Table of Contents
