Table of Contents
Advertisement
4. Information button
In AUTO, manual or off mode, successive presses on the
- find out the room temperature or the setpoint temperature (depending on the configuration
during installation (menu 2-04),
- show the boiler/heat pump operating hours meter, as well as the number of days remaining
before maintenance (if this setting is on, menu 2-07),
- show any faults (see § "Changing batteries").
Setpoint
Measured
temperature
temperature
5. Time setting
31
2
1
3
1
❶ Turn the dial to
.
❷-> ❻ Set the day, month, year with + or -.
❼ Confirm with OK.
6. Adjusting temperature settings
- If the Comfort temperature is controlled by each radiator (menu 1-08 = 1), you can only set Economy and Frost
protection temperatures.
- The temperature settings may be restricted (menu 2-01 = 1).
30°C
2
5°C
3
1
❶ Turn the dial to
.
The Comfort setpoint
temperature flashes.
❷ ❸ Press + or - to adjust, then
press OK to confirm and go to the
next setting.
i
button enable you to:
Operating hours meter (boiler/
heat pump).
4
0 2 3
h
(ON)
5
Time to boiler/heat pump
maintenance
12
2021...
4
1
6
5
7
30°C
16°C
4
5°C
5°C
5
7
❹ -> ❼ Repeat the operations
to adjust the Economy and Frost
protection temperatures.
Return to automatic
mode
23
8
0
9
❽->❿ Set the hour then the minutes with + or -.
⓫ Confirm with OK.
⓬ To exit the mode, turn the dial.
6
EXIT
8
❺ To exit the mode, turn the dial.
59
10
0
11
12
EXIT
Comfort (from 5°C to 30°C)
Economy (from 5°C to 30°C)
Frost protection (5°C to 16°C)
10
Advertisement
Table of Contents
