Override; Information Button - DELTA DORE Tybox 137+ Installation And User Manual

3. Override

In AUTO mode, you can use the override to change the setpoint temperature until the next programmed point.
Programming
type
Programming via the
Tybox
Programming via the
Tydom app (menu 1-10 = 1)

4. Information button

In AUTO, manual or off mode, successive presses on the
- find out the room temperature or the setpoint temperature (depending on the configuration
during installation (menu 2-04),
- show the boiler/heat pump operating hours meter, as well as the number of days remaining
before maintenance (if this setting is on, menu 2-07),
- show any faults (see § "Changing batteries").
Setpoint Measured
temperature temperature
Override
type
Example: it is 15:30 and you would like to switch to Comfort mode
before the set time (17:00).
Comfort or
Economy
❶ Press
the button
To cancel the current override, press the button once more.
Setpoint
temperature
adjustment.
❶ Press the
OK button.
Operating hours meter (boiler/
heat pump).
4
0 2 3
h
5
Time to boiler/heat pump
maintenance
Operating mode
0h 6h
1
❷ Override
in progress
1
❷ Set the desired
setpoint using + and -
and confirm with OK
(❸).
i
button enable you to:
(ON)
Return to automatic
mode
8h 15h30 17h 23h 0h
3
2
❸ At 17:00, the programme
will return to its usual
schedule.
4
2
3
❹ The override will be
cancelled the next time the
Tydom app programme
changes.
15