3/ Setting Temperatures - DELTA DORE TYBOX BUS OT Instructions For Use Manual

3/ SETTING TEMPERATURES
❶ Turn the selector knob to the mode to
be set:
- Comfort mode ,
- Economy mode
- Frost protection mode
❷ Set the required temperature.
The temperatures are adjusted from 5°C
to the maximum comfort temperature
(see CF03 user settings)
Default values:
- Comfort temperature
- Economy temperature
- Frost protection temperature
❸ If a setting has been made, OK appears
on the screen. Press OK to confirm.
Otherwise, (no setting modification, or to
cancel) turn the selector knob.
❹ Repeat the operation for each mode.
If you remain in one of these modes, the thermostat will continuously
operate in relation to this setting (no programming).
If CF02 =1, the temperature setting is displayed for 30 seconds. After this time,
it reappears when pressing + or -.
8
.
1
: 19°C
: 15.5°C
2 5°C -> Confort max.
: 7°C
4/ PROGRAMMING
Upon activation, the programming for each day is a comfort period
from 6:00AM to 11:00PM. You can create different Economy and
AUTO
Comfort periods using the
0h
0h
PROG
Example: For Comfort from 6:00AM to 8:00AM and 5:00PM to
11:00PM.
AUTO
PROG
1
1
Turn the selector
AUTO
PROG
Day 1 =
Monday
3
Programmable
period
and buttons.
6h 8h 17h 23h 24h
6h 8h 17h 23h 24h
0h 6h 8h 17h
knob to PROG.
Press
1
AUTO
AUTO
PROG
0h 2 4 6 8 10 12 14 16 18 20 22 24
PROG
0h 2 4 6 8 10 12 14 16 18 20 22 24
AUTO
EN
23h 24h
AUTO
AUTO
PROG
PROG
AUTO
2
2
PROG
Setting assigned to
the period
2
9