Siemens MOBILETT Plus Maintenance Instructions Manual page 22

22
Technical Safety Checks,
Test certificate - check
5.2 Are the warning devices functioning
properly?
5.3. Do all system movements stop prop-
erly in their end positions?
5.4 Does the collision protection device
stop all system movements properly
(e.g. collision protection)?
5.5. Are all safety distances (wall, floor,
ceiling) met or ensured by other appropri-
ate measures (such as light barriers)?
5.6. Are the other safety shutdown devices
functioning properly (e.g. safety floor
plate)?
5.7 Are the positions of the table and unit
reproducible (e.g. zero positions, layer
height, etc.)?
MOBILETT Plus/ -E/ -M SPR8-215.831.04.03.02
07.05
Maintenance instructions - check/
Comments
2.15 Checking the radiation indicator,
checks:
SIE Radiation indicator
SIE Audible signal
n.a.
n.a.
n.a.
2.21 Motor drive function, check:
SIE Shutdown
n.a.
Page 22 of 64
CS PS 24
General
Siemens AG
Medical Solutions