Brakes - Siemens MOBILETT Plus Maintenance Instructions Manual

Inspection and maintenance
2.2.5

Brakes

Fig. 8:
WARNING
SIM Uniformity
SIM Braking force
SIM Locking
•
Check whether the hand brake is sufficient to stop the unit and that it does not pull to the
left or the right when the brake is applied.
•
Lock the brake.
•
Remove the front, rear, left and right covers.
•
The brake force can be increased by increasing the tension on the brake cable
(Fig. 8 / p.
hand brake/parking brake" in the service instructions.
Siemens AG
Medical Solutions
There is a risk of life-threatening electric shock.
Make sure protective measures have been taken prior to
opening the unit.
Disconnect the system from the mains.
(Protective measures when working on the capacitor
bank / p.
It should not be possible to push the MOBILETT using average force. Slight
skidding is permissible when applying a force greater than 350 N.
29). Additional information can be found in the section on "Adjustment of the
SPR8-215.831.04.03.02
07.05
14).
Page 29 of 64
CS PS 24
29
MOBILETT Plus/ -E/ -M