Tektronix IsoVu TIVP Series User Manual page 55

Syntax
Arguments
Examples
CH<x>:PROBEFunc:EXTUnits:STATE
This command sets or queries the custom units enable state for the specified channel. The channel is specified by x.
Syntax
Arguments
Examples
CH<x>:PROBE:DYNAMICRANGE? (Query Only)
This command queries the dynamic range of the probe that is attached to the specified channel. The channel is specified by
x.
Syntax
Returns
Examples
TIVP Series IsoVuTM Measurement System User Manual
CH<x>:PROBEFunc:EXTUnits <QString>
CH<x>:PROBEFunc:EXTUnits?
<QString> indicates the attenuation unit of measurement for the specified
channel.
CH4:PROBEFUNC:EXTUNITS "Pascals" sets the unit of measurement
for the Channel 4 external attenuator.
CH2:PROBEFUNC:EXTUNITS? might return "Pascals", indicating that
the Channel 2 external attenuator unit of measurement is Pascals.
CH<x>:PROBEFunc:EXTUnits:STATE {ON|OFF|<NR1>}
CH<x>:PROBEFunc:EXTUnits:STATE?
OFF argument turns off external units.
ON argument turns on external units.
<NR1> = 0 turns off external units; any other value turns on external units.
CH2:PROBEFunc:EXTUnits:STATE ON turns on external units.
CH2:PROBEFunc:EXTUnits:STATE? might return 0, indicating that
external units are off for the specified channel.
CH<x>:PROBE:DYNAMICRANGE?
The returned value is the delta between the current minimum and maximum range
with some tolerance. It is also the delta between the probe range indicators (if
currently displayed).
CH1:PROBE:DYNAMICRANGE? might return 1.3056 , indicating that the
dynamic range of the probe attached to the Channel 1 is set to 1.3056 V.
Remote programming
55