Oneida Air Systems Dust Deputy Deluxe Owner & User Manual page 9

Assembly Instructions (Continued)
Install the Caster Hardware Pack (H) to the Bucket (F).
4
Install Wheels (H3) at three of the previously drilled hole
locations using two Washers (H2), and one Nylock Nut
(H1)[FIG. 5].
Note: To make sure the safety instructions are not covered up
when attaching to your wet/dry vacuum, DO NOT install a
caster into the hole on the "Blank" side [FIG. 4].
H3
H2
H3
FIG. 5
oneida-air.com 9