Oneida Air Systems Dust Deputy Deluxe Owner & User Manual page 13

Assembly Instructions (Continued)
Attach one Elbow (J) to the top outlet of the Cyclone (A)
9
and affix Hose (I) to the tapered end of the Elbow. Attach
the other open end of Hose to the second Elbow and attach
to the inlet of your wet/dry vacuum.
Connect the Cyclone's inlet (sideways facing port) to your
dust producing tool with your vacuum's hose or ductwork
[FIG. 10a].
Note: If your vacuum hose is not tight on the inlet or it keeps
pulling off, use the Clamp Band (K) and/or the two O-Rings
(L) [FIG. 10b] [FIG. 10c].
To wet/dry vacuum
To Tool
FIG. 10a
K L
FIG. 10b FIG. 10c
oneida-air.com 13