Oneida Air Systems Dust Deputy Deluxe Owner & User Manual page 23

FAQ (Continued)
What vacuum do you recommend for the Dust Deputy?
The Dust Deputy can be used with any make, model, or size wet/
dry vacuum with an inlet ranging from 1.5" to 2.5" in size. We
recommend that it has an airflow rating of at least 50 CFM to
ensure optimum dust separation performance.
The elbows that come with the Dust Deputy Deluxe Kit measure
out to an ID of 2.25" and an OD. If your wet-dry vacuum hose or
inlet is a different size you will need an adapter as noted in the FAQ
"What do I need to hook up my Dust Deputy to my vacuum?".
Can I use this upstream of a 650 CFM single stage dust
collector?
No. The smaller Dust Deputy cyclone is intended for use with
HIGH pressure and LOW airflow systems, such as wet/dry
vacuums, with port sizes 2.5" diameter and smaller. It would not
be suitable for a HIGH airflow, LOW pressure system (i.e. dust
collector).
You would want to look at our line of Super Dust Deputy cyclones
instead. Match the cyclone based on the size of your dust collector's
intake.
Can I use the Dust Deputy with my 4" hose / port?
No. The standard Dust Deputy cyclones are designed for use with
ports/hose that are 1" to 3" in diameter.
Connecting 4" tools to the Dust Deputy cyclone's 2" ports will
result in significant losses in airflow and suction power. Larger
ports (4" and larger) will instead require one of our Super Dust
Deputy cyclones.
oneida-air.com 23