Supermicro Optane Persistent Memory 200 Series User Manual page 48

Super Intel® Optane™Persistent Memory 200 Series Configuration User's Guide
Provisioning
During the provisioning process, a goal is specified and configured into Memory Mode or
App Direct Mode. This goal will be applied after the system has been reboot.
Memory Mode Configuration
Use the ipmctl create -goal MemoryMode=n command to provision any percentage of
PMem capacity on all sockets, where n represents the percentage number of capacity to be
provisioned in Memory Mode. A reboot is required to process new memory allocation goals.
Note: Mixed Memory (MX) Mode is not supported by the X12 Series motherboards;
n=100.
D.1. Memory Mode Configuration (CentOS)
D.2. Memory Mode Configuration (Windows)
48