Supermicro Optane Persistent Memory 200 Series User Manual page 40

Super Intel® Optane™Persistent Memory 200 Series Configuration User's Guide
Create Memory Mode
To configure PMem as Memory Mode, select Memory Mode [%] and enter 100 as the default.
Save the setting and reboot the system for the changes you've made to take effect.
Note: To configure PMem as Memory Mode, Memory Mode [%] needs to be set to 100.
•
Scroll down to the screen to select Create goal config again, and press <Enter> to re-
confirm your created goal.
C.3. Memory Mode Setup
C.4. To Confirm Goal Created
40