Supermicro Optane Persistent Memory 200 Series User Manual page 50

Super Intel® Optane™Persistent Memory 200 Series Configuration User's Guide
Create a Goal from a Configuration File
Use the ipmctl load -source <file> -goal command to load goals and special configurations
from a configuration file. Use the ipmctl dump -destination <file> -system -config
command to save the current configuration to a file.
G.1. Create a Goal from a Configuration File (CentOS)
G.2. Create a Goal from a Configuration File (Windows)
H.1. Save Current Goal Configuration to a File (CentOS)
H.2. Save current Goal Configuration to a File (Windows)
Show Current Goal
Use the ipmctl show -goal command to display the goal that is currently in place.
Delete Goal
A goal will only be executed after a system reboot. Use the ipmctl delete -goal command
to clear the goal that is currently in place.
50