To Configure Pmem As App Direct (Ad) Mode - Supermicro Optane Persistent Memory 200 Series User Manual

Intel configuration for supermicro x12spx/x12dxx/ x12qxx motherboards

Table of Contents

3.2 T o Configure PMem as App Direct (AD) Mode

Please complete all steps listed in Section 3.1. When the screen shown on the previous page

displays, select the Provisioning submenu as shown below.

After selecting Provisioning, press <Enter>, and the Create goal config screen will display.

Press <Enter> to enter the Create Goal Configuration submenu.

Setting All PMem Modules to App Direct Mode

Please complete the procedures below to properly configure Persistent Memory as App Direct

Mode.

•

Select Platform as the default setting for the item: Create goal config for. This will set

all PMem modules to App Direct Mode.

Chapter 3: Configuring Intel PMem 200 Series Settings Using BIOS

B.1. Provisioning Submenu

B.2. Create Goal Configuration Submenu

B.3. Create Goal Configuration for Screen

Table of Contents

Need help?

Do you have a question about the Optane Persistent Memory 200 Series and is the answer not in the manual?