Table of Contents
Advertisement
3.3 T o Configure PMem as Memory Mode (MM)
This section provides instructions on how to configure PMem as Memory mode. To configure
PMem as Memory Mode, please complete all steps listed in Section 3.1.
•
When the screen shown above displays, select the Provisioning submenu as shown
below.
•
After you've selected the Provisioning submenu and pressed <Enter>, the following screen
will display.
•
When the screen above displays, select Create Goal Config submenu and press <Enter>.
Chapter 3: Configuring Intel PMem 200 Series Settings Using BIOS
B.35. No Namespaces in the System screen
C.1. Provisioning screen
C.2. Create Goal Config Screen
39
Advertisement
Table of Contents
Need help?
Do you have a question about the Optane Persistent Memory 200 Series and is the answer not in the manual?
Questions and answers