Supermicro Optane Persistent Memory 200 Series User Manual page 41

•
After pressing <Enter>, the following screens will display to show the goal you've created.
•
Press F4 to invoke the Save & Exit Setup submenu and press Yes to save the changes
as shown below.
•
Reboot the system, and enter the BIOS utility again to continue with PMem configuration
Note: Be sure to reboot your system for the changes you've made to take effect.
Chapter 3: Configuring Intel PMem 200 Series Settings Using BIOS
C.5. Memory Mode Setup
C.6. Save MM Config Setting
41