Table of Contents
Advertisement
System I/O Interface
Simple Maintain Process
Memory Installation
Warring: ARK-5261 system already is on-board 4GB
memory inside, if you want to expand to 8GB.
Please connect your sales or agents to order com-
patible memory modules, the part number below:
AQD-SD3L4GN16-SG
4G SO-DDR3-1600 512x8 1.35v SAM
Note:
If ARK-5261 use differnet brand of SO-DIMM
memory, the system will be not boot.
COM with Power Jumper Selection
1. Unscrew and remove left side case cover.
2. COM 1 & 2 Power Jumper location and you can be
selection 5V or 12V power based on your device power
required.
Simple Maintain Process
HDD Installation
1. Unscrew the HDD door screws
2. Unscrew the HDD tray's screw.
3. Assemble 2.5' SATA HDD with four screws on bottom
side fo bracket.
4. Insert the bracket into the housing.
5. Secure the HDD tracy with screw
6. Replace the HDD door and secure with screws.
m-SATA Installation
1. Unscrew 2 screws and remove the top cover.
2. Unscrew and remove top bracket & left side case cover.
Install the m-SATA and secure screw.
3. Replace the left side cover first and top bracket/cover
and secure with screws.
ARK-5261 Startup Manual 3
(cont.)
Advertisement
Table of Contents
