BEETLE/iScale TOP
_____________________________________________________________________
Interfaces:
-
-
-
-
-
-
Power Consumption:
-
-
-
Manufacturer Certification
This device fulfills the requirements of EU Regulations 89/336/EEC
"Electromagnetic Compatibility Directive" and 73/23/EEC "Low Voltage
Directive".
The device carries the CE logo on its rear side, or the logo is located on
the packaging.
_____________________________________________________________________
10
Power input +5V, +12V
COM1 RS232
COM2 current loop
Test connector
Internal LCD interface
to VGA/4 MUX Controller
Calibration switch with plastic protecting ring and calibration seal
P5v (VCC):
P12V
(Scale interface current loop)
P12V (incl. scale)
4pin hard disk connection
9pin DSUB connector
15pin DSUB connector
2x7 pin
26pin Zif connector
300mA
50mA
200mA