Setting Of Functions - Gree XE70-33/H Owner's Manual

Wired Controller XE70-33/H
HBS network are existed. At this time, ERV+DX Coil will be started up or stay
at the standby status according to the on/off of indoor unit under the HSB
network; once "linkage" is started up under CAN linkage mode, ERV+DX Coil
will be started up or stay at the standby status according to the on/off of
indoor unit under the CAN network.
② Auto control mode can be started up only when the air box is existed.

8.6 Setting of Functions

Under menu page, select "Func" to enter into functional setting page, as shown
below.
Switch the option via "
off corresponding function. If the left of certain function displays "
function is turned on, if it displays " ", it means the function is turned off. Press " " or
" " button can switch to the previous or the next page, press "
setting and return to the previous page.
NOTES:
① If the function under certain circomstances is invalid, it will display gray, press
" " or "
② After lock function is activated, it will automatically return to homepage, and
any button operation in homepage become invalid, only operate according to
the prompts can unlock the function.
" or "
" button will skip over this function.
" button, press "
56
" button can turn on or turn
", it means the
" can save the