Instructions For Status Column - Gree XE70-33/H Owner's Manual

5 Instructions for Status Column

Icon Name
Master
Group control
Slave wired
controller
Shielding
Card pulling
Lock
Invalid operation
Error
Memory
Table 5.1 Instruction for Status Column of AC
Display when the current indoor unit connected by the wired
controller is master indoor unit (the icon will not be displayed
when the wired controller connects to heat recovery unit)
Display when one wired controller controls multiple indoor units at
the same time
It means the current wired controller is a slave wired controller
(address of wired controller is 02)
It means shielding status
The gate control card is pulled out
Lock status
Display when the operation is invalid
Display when error occurs
Memory status (when the unit is re-energized after power failure,
the indoor unit will resume to the setting status)
Wired Controller XE70-33/H
Instruction
7