Factory Restore
System Self-Test
61200326L1-1A
Individual IMUX-56/64 Modules do not have independent configurations;
there is one configuration for all IMUX-56/64 Modules in an ATLAS. This
configuration can be returned to factory default by pressing
sor is positioned over the BONDING Config submenu, found in the System
Config menu.
Factory defaulting an individual IMUX-56/64 Module will not affect the
configuration.
System Self-test, a submenu of the ATLAS main menu item System Utility,
executes both the IMUX-56/64 Module internal test and the ATLAS internal
test. The results of the self-test are displayed in the self-test log.
The unit continuously updates the display on the self-test log screen until all
test results are shown. For additional information on self-test, see the ATLAS
User Manual.
IMUX-56/64 Module User Manual
Chapter 3. Operation
while the cur-
F
3-9