Servicing Tools; Servicing Tools Overview - Husqvarna K770 Workshop Manual

4.1 Servicing tools overview

1
4
7
Po- Designation
si-
tion
1 Air clearance gauge
2 Assembly punch
3 Bearing press
4 Bearing press
5 Bearing puller
6 Combination wrench
7 Compression tester
8 Bearing press
9 Cylinder seal

12 - Servicing tools

4 Servicing tools
2
5
8
Used for
To adjust the air clearance between the ignition module and the fly-
wheel.
To assemble the sealing rings of the crankshaft in the crankcase.
To disassemble the primary bearing and assemble the crankshaft.
To assemble the primary bearing.
Remove the primary bearing from the crankshaft.
General.
To examine the compression in the cylinder.
To disassemble and assemble the clutch drum ball bearing, blade
shaft bearing and the fan bearings.
To examine the crankcase for leaks.
3
6
9
Order No./
Source
502 51 34-02
502 50 82-01
544 10 36-02
506 37 61-02
531 00 48-67
506 38 26-01
531 03 16-86
504 56 79-01
544 10 33-01
701 - 002 -