Husqvarna K770 Workshop Manual page 18

5.3.1 To remove the starter
1. Loosen the 4 screws on the guard.
2. Remove the starter.
5.3.2 To remove the cutting head Dry Cut
1. Remove the connection bend.
2. Loosen the belt tensioner with the combination
wrench
18 - Product overview for repair and servicing
3. Loosen the nuts and remove the front belt cover .
4. Remove the belt from the pulley and remove the
cutting head.
5. Remove the 3 screws on the rear belt guard.
Remove the guard.
701 - 002 -