Husqvarna K770 Workshop Manual page 23

5.3.9 To remove the muffler
Remove the cutting head the and the starter before you
remove the muffler.
1. Loosen the four screws.
2. Remove the muffler.
5.3.10 Before you remove the vibration
absorbers
Before you remove the vibration absorbers you must
remove the following parts.
• Air filter
• Cylinder cover
• Top air duct cover
• The screw holding the carburetor
• Starter
• Air duct cover
• Cable lug by the ignition module
• Cable at the ground point
701 - 002 -
5.3.11 To remove the vibration damping units
1. Remove the screws of the vibration damping units.
Product overview for repair and servicing - 23