Husqvarna K770 Workshop Manual page 37

6.6.2 To disassemble the guides
1. Remove the support insert.
2. Push out an edge of the guides, then push them out
by hand.
6.6.3 To examine the inlet system
Dust can decrease the life of the engine. Dust on the
inner side of the seals means there is defective or
incorrectly installed components.
1. Look for leaks. Make sure the rubber guides are not
cracked.
701 - 002 -
6.6.4 To assemble the inlet manifolds
The parts must be installed correctly. Make a note that
the guide to the inlet is irregular.
Make a note of the groove on the holder.
Repair and servicing - 37