Tools - Husqvarna K 1260 Workshop Manual

19
53
●
506 38 26-01
Combination spanner
(Supplied with the machine)
● The vibration dampers' inner
screw, Torx T27. Blade diameter
5 mm.
502 71 27-02
Workshop key Torx T27
● Universal use for all Torx T27,
except the vibration dampers'
inner screw. See the tool above.
502 71 13-01
Test spark plug
Test of the ignition system and
●
the spark plug's function.
502 51 34-02
Air gap gauge
Gauge for the air gap between the
ignition module and the flywheel.
● Assembly of the ignition
module.
502 51 49-02
Flywheel puller
Puller for the flywheel. Fits all
petrol-driven Husqvarna cutters.
Dismantling the flywheel.
●
502 71 14-01
Tachometer
Instrument for measuring the
engine's speed.
● Idle setting.
● Checking the maximum speed.
501 56 27-01
Pressure tester
● Test of carburettor function ality.
● Test of fuel lines.
● Test of non return valve in the
tank ventilation.

TOOLS

= Service action
531 03 16-86
Compression tester
Compression test, cylinder.
●
502 50 70-01
Kit for piston service
Consisting of piston ring com-
pressor, piston stop and sup port
plate.
● Piston service.
504 91 06-05
Piston stop
Locks the crankshaft's rotation.
Dismantling the clutch.
●
505 38 17-05
Gudgeon pin punch
Dismantling and assembling the
●
gudgeon pin.
531 03 06-23
Pressure tester
Kit consisting of pump with
pressure gauge and nozzles, hose
and sealing plug for universal use.
● Leakage testing the crankcase.
502 71 39-01
Cylinder seal
Seal for the cylinder's exhaust
port.
● Leakage testing the crankcase.
502 71 38-01
Cylinder seal
Seal for the cylinder's inlet port.
● Leakage testing the crankcase.