ActronAir LC7-2W Operation Manual page 28

Return to Home Page
Operation Manual
4. Press the PROG button to enter Program Menu 04.
NOTE
Mode lock is OFF by default.
5. Press the
lock ON.
6. Press the PROG button to accept the selection.
Press the EXIT button once to go back to the Main
Screen.
7. When the MODE button is pressed. The
will appear for 3 seconds and user won't be able to
change mode.
NOTE
To disable Mode Lock, follow the same steps above. However, in step 5
select OFF.
13.05. Setpoint Lock
13.05.01. Activating Setpoint Lock
NOTE
• Setpoint Lock will prevent user from changing the setpoint on wall
controller.
• Setpoint Lock may be set independently on each wall controller
connected.
1. Set the setpoint based on the desired target
temperature.
or button to turn the Mode
LC7-2 Wall Control
symbol
Page 28