ActronAir LC7-2W Operation Manual page 23

Return to Home Page
Operation Manual
7. Press the PROG Button to accept the desired
minutes. Day field will start blinking. Day indicator
will be flashing, i.e. MON.
8. Press the
9. Press the PROG button to accept the desired Day.
Screen will show the final selected time and day.
10. Press the EXIT button twice to go back to Main
Screen.
13.03. Temperature Set Back
Normally, the air conditioning system is turned off
at unoccupied times or at night, which can result in
the building temperature becoming quite hot (e.g.
30 o C) or quite cold (e.g. 12
the air conditioning system, it can take a long time
to achieve a comfortable temperature (e.g. 23
The temperature set back feature will maintain
the building temperature at a pre-determined and
reasonable temperature closer to your chosen set
temperature (e.g. 23
start in achieving your comfortable temperature.
The air conditioning system must be Turned-Off
before performing these procedures.
13.03.01. Activating the Temperature Set Back
NOTE
Activating Temperature Set back may cause unit to operate even
if the LC7-2 Wall control is Off. Please proceed with activating the
Temperature Set back feature if you understand the purpose and
operating parameters. For further inquires, please contact ActronAir
Technical Support on 1800 119 229.
or button to adjust the Day.
o C). When you Turn-On
C), thus giving you a big head
o
LC7-2 Wall Control
C).
o
Page 23