Return to Home Page
Operation Manual
4. Press the PROG button to move to Event 1 Off
time. Press the
time in 15 minutes increments.
5. Press the PROG button to move to Event 2 On
time. Repeat Step 4 to program Event 2 On and
Off time.
NOTE
Press the EXIT button at any time if no further changes to later
Days/Events are required.
6. Press the PROG button to move onto Event 1 On
Time of following day, TUE.
7.
Repeat the above steps until you have
programmed all the events you require.
Otherwise, press the EXIT button twice to exit
Program Menu. TIME CLOCK display will show on
the screen to indicate that it is active.
NOTE
If a button has not been pressed after 60 seconds the controller
will exit the Time Clock program menu and return to the home
screen. During a power failure, the controller will retain the time
and time clock settings.
LC7-2 Wall Control
or
button to adjust the
Page 17