ActronAir LC7-2W Operation Manual page 26

Return to Home Page
Operation Manual
8. Press the PROG button to accept HEAT Set back
temperature.
9. Press the EXIT button once to go back to the Main
Screen.
13.03.03. Temperature Set Back Screens
Tabulated below are the different screens that are
displayed on the LC7-2 during Set back operation.
H - Heat To Set back limit
Set back
C - Cool To Set back limit
Set back
U - Unit setpoint prior to unit turned off
setpoint
R
temp
Case
H ≤ R ≤ C
Set back temp Set back
R < H
temp Set back
R > C
temp Set back
NOTE
• Indoor fan speed will operate to last setting.
• The button backlight is always off under the Set back mode when
operation mode is heat or cool.
13.03.04. De-Activating the Temperature Set Back
1. Press the PROG button to enter Program Menu.
2. Press the
Program Menu 03.
- Room Temperature
Temperature Mode of
Displayed Operation
U Off
setpoint
H
Heating
Set back
C Cooling
Set back
or
LC7-2 Wall Control
LC7-2 Display
button to navigate to
Page 26