ActronAir LC7-2W Operation Manual page 22

Return to Home Page
Operation Manual
13.02. Setting the Clock
The system's status must be On before performing
these procedures.
1. Press the
2. Press the
Program Menu 02.
3. Press the PROG button to enter Program Menu
02. Display will show clock display. Hour field and
TIME is blinking.
4. Press the
AM / PM will adjust after the 12th hour.
5. Press the PROG button to accept the desired hour.
Minute field will start blinking.
6. Press the
Minutes.
PROG button to enter Program Menu.
or
or button to adjust the Hour.
or
LC7-2 Wall Control
button to navigate to
button to adjust the
Page 22