ActronAir LC7-2W Operation Manual page 11

Return to Home Page
Operation Manual
2. Adjust the Indoor Fan speed (LOW, MED and
HIGH) by pressing the FAN button successively
until you reach the desired speed.
NOTE
Additionally, whilst the system is Off, pressing the FAN button will allow
Fan Only operation.
10.02. Cooling Operation
1. Press the MODE button until COOL appears on the
display.
2. Set the desired temperature by pressing either the
or
3. Adjust the desired Indoor Fan speed by pressing
the FAN button. Available settings are: LOW,
MED, HIGH, CONT LOW, CONT MED and CONT
HIGH.
10.03. Heating Operation
1. Press the MODE button until HEAT appears on the
display.
2. Set the desired temperature by pressing either the
or
3. Adjust the desired Indoor Fan speed by pressing
the FAN button. Available settings are: LOW, MED,
HIGH, CONT LOW, CONT MED and CONT HIGH.
NOTE
Setting the indoor fan speed to continuous mode can cause cool drafts when
operating the system on heating mode during compressor off cycles.
10.04. Auto Operation
1. Press the MODE button until AUTO appears on
the display.
2. Set the desired temperature by pressing either the
or
Adjust the desired Indoor Fan speed by pressing
the FAN button. Available settings are: LOW,
MED , HIGH, CONT LOW, CONT MED and CONT
HIGH.
buttons.
buttons.
button.
LC7-2 Wall Control
■
Page 11