Bartscher Silversteam 5230M Manual page 34

Humidity Discharge Valve
The humidity extraction function consists in removal of humidity that may condense
in the thermal processing chamber during cooking/roasting process.
Fig. 14
We recommend to set the discharge valve lever in closed position P1 for 'Steaming'
and 'Combi steaming'.
Interior Lighting
Lighting of the thermal processing chamber is automated and connected with the
appliance's operation. At the end of the cooking/roasting cycle (e.g., when the timer
EN
is set to '0' or the core temperature reaches the set value), the lighting is off.
Switching the Appliance Off
1. To switch the appliance off, the M 1 function selector knob must be set to I 1
(OFF) position.
LED 1 goes off.
2. To finish the preparation process earlier, rotate the M 3 timer to '0' position (also
in the case of cooking/roasting with the set core temperature).
32 / 40
1. Set the discharge valve lever L1 to the
P1 left: VALVE CLOSED
P2 right: VALVE OPEN
Also, when the discharge vale is closed,
there is no threat of overpressure in the
thermal processing chamber existing, for the
pressure is still being controlled by the
extractor.
Fig. 15
Operating Instruction
following positions:
Fig. 16
116622