JUKI PS-800-12080 Instruction Manual page 58

Error Error description
Code
E218 Waiting for the working data
E219 Electrical fault, please con-
tact the manufacturer
E220 Wrong upgrade file
E221 Upgrade file type error
E222 Could not upgrade
E223 Upgrade file not the same
OEM manufacturer
E224 Head board can not be
connected 1.The connec-
tion
E225 Connecting the main con-
trol board...
E226 Current file is invalid
Fault Cause
1. The file is too large, the moth-
erboard waits for the screen to
transfer files during processing
2. The screen cable has poor contact
or is disconnected.
3. The screen line is tied with a
strong interference source
4. The screen or motherboard pro-
gram is too old
5. The screen or motherboard hard-
ware is damaged
Motherboard hardware exception
1. The upgrade file is not suitable for
this system
2. The upgrade file is damaged
The upgrade file is corrupted or the
upgrade file is not suitable for this
system.
Motherboard hardware exception
Upgrade file version does not match
1. The connection between the head
board and the motherboard is
broken or the interface is loose.
2. Headboard or motherboard hard-
ware failure
1. The screen cable interface is
loose or damaged
2. Screen or motherboard hardware
failure
1. Upgrade without selecting the
upgrade file
2. The read file is damaged or of the
wrong type
3. U disk is incompatible or damaged
– 55 –
Solution
1. Need to wait for a while to disappear
automatically
2. Check the screen line
3. Separate screen wires from strong
interference wires such as motor power
wires
4 Upgrade the latest screen or mother-
board program
5. Test whether you can upgrade the
motherboard program; test whether the
communication is normal in the "Test
Transmission" interface, and replace
the hardware if it is abnormal
Contact equipment manufacturer
1. Use the corresponding upgrade file,
such as BP01 system can only upgrade
BP01 program
2. Confirm whether the upgrade file in the
USB flash drive is damaged
Need to select the corresponding type of
upgrade file for upgrade
Contact equipment manufacturer
The system is not the corresponding legal
upgrade file
1. Check the cable of the head board
2. Replace the headboard or motherboard
1. Check the screen cable for bad contact
or damage
2. Replace the screen or motherboard
1. Insert U disk and select upgrade file
2. Replace the correct documents
3. Replace U disk