JUKI PS-800-12080 Instruction Manual page 45

Classifica-
tion of pa- No. Parameter name
rameters
Speed P19 Button sewing speed
parameter 3 after the button is
pressed (mm/min)
P174 Machine head 2 speed
(mm/s)
P175 Machine head 3 speed
(mm/s)
P178 Continuous inching
speed
P773 Number of revolutions
in the reverse direction
(r/min)
P774 Number of stitches to be
sewn at a limited speed
at the end of sewing
P775 Limited sewing speed to
be employed at the end
of sewing
Clamp P22 Prohibition of sewing
during lifting of the
setting
clamp
P25 Thread clamp starting
angle at the beginning
of sewing
P26 Thread clamp ending
angle at the beginning
of sewing
P27 Thread clamp starting
angle during thread
trimming
P28 Thread clamp ending
angle during thread
trimming
P781 Whether or not the
clamp is required during
travel
P743 Delay in opening of the
double clamp (ms)
P744 Delay in lowering of the
double clamp (ms)
Bobbin P29 Bobbin winder status
winder
setting
P30 Winding speed (r/min)
P31 Bobbin winding time
setting (s)
Reset P36 Clamp at the time of
resetting
setting
P264 Clamp is opened after
manual resetting
P38 Return-to-origin method XY simultaneous
Standard
Range
value
100 to 20000 8000
0 to 2000 0
0 to 2000 0
Reduce / mini- Reduce
mum / normal
0 to 3000 0
0 to 30 0
100 to 1800 0
Yes/No Yes
1 to 990 10
1 to 990 10
1 to 990 15
1 to 990 180
Yes/No No
0 to 5000 0
0 to 5000 0
Allowed / prohibit- Allowed
ed
100 to 4500 2200
1 to 63000 200
Yes/No No
Yes/No Yes
XY simul-
/ X preference / Y taneous
preference
– 42 –
Meaning of parameter and comment
Eight direction keys are supported
Operation speed using
XY axes speed when using a laser knife
XY axes speed when using a laser knife
Travel speed during pattern creation
Reverse feed stitching speed
Setting of the number of stitch from
which the sewing speed is limited at the
end of sewing a pattern
This parameter is used in combination
with P774 to obtain the specific limited
speed value.
Prohibition of sewing during lifting of the
cassette clamp
Thread clamp ON angle at the begin-
ning of sewing
Thread clamp OFF angle at the begin-
ning of sewing
Thread clamp starting angle during
thread trimming
Thread clamp ending angle during
thread trimming
Bobbin winder
Default state
Bobbin winding speed
Time setting of bobbin winding
Cassette clamp comes down when
returning to origin
Cassette clamp goes up when returning
to origin by pressing the reset button
"xy simultaneous" means that the x and
y axes are simultaneously reset to their
origins. "x preference" means that the
x axis is firstly reset to the origin, and
"y preference" means that the y axis is
firstly reset to the origin.
icon