Keys - Thermo Scientific Sorvall Legend X1R Instruction Manual

3
Control panel
Control panel
Control panel
The control panel contains the keys and displays of the centrifuge (only the power switch is located on
the back of the device). All parameters can be selected and changed during operation.
Program selection keys
Directory key
Braking and acceleration key

Keys

The keys allow user intervention for controlling the operating mode as follows:
Key
Sorvall Legend X1R
3-2
SPEED
Changing the display mode
Speed / RCF Value
Changing the display mode
Run time / Remaining run time
Start
Stop
Open lid
Pulse
Directory
Bucket
Braking and accelera-
tion curves
Changing the display
mode
Display
TIME
TEMP
Bucket
numeric pad
Changing the display mode
chamber / sample temperature
Display contents
Normal start of the centrifuge
End run manually
Automatic release (possible only when device is switched on); Emergency
release (see "Mechanical emergency lid release"
By pressing the key the centrifuge starts immediately and accelerates
up to the end speed. Releasing the key initiates a stopping process at the
highest braking curves.
By pressing the key up and down you change the value in thedisplay.
Use the key in order to have all available bucket types displayed in
succession.
Use the key to toggle between braking and acceleration curves.
Use the key to change the display mode. (speed / RCF value, sample /
chamber temperature, run time counter from start or preset speed on)
PULSE
START
ENTER
on page 7-2)
Thermo Scientific
OPEN
STOP